Panic Bar Installation & Repair in Orlando, FL

Budget roughly $250–$700 per door in the Orlando area: the device itself and the labor. A basic rim device on a single metal door sits at the lower end; vertical rod devices for double doors and heavy-duty or alarmed hardware sit at the higher end. The quote lists device and labor separately before work starts.

A rim device mounts on the door surface and latches into the frame — typical for single doors. A vertical rod device runs rods to latches at the top and bottom of the door, which is how most double doors without a center mullion latch. The right type depends on the door construction; the technician confirms it on site before ordering hardware.

Exit doors in many commercial occupancies are required to have egress hardware that opens in one motion — that is exactly what panic bars provide. The exact requirement depends on your building’s use and occupancy load, and the local fire marshal or inspector has the final word. The hardware is installed to manufacturer specification, and if something on your door looks non-compliant, you will be told plainly.

Often repaired: sticking bars usually come down to the latch mechanism, springs, or alignment, and those parts are serviceable on site. If the device is bent, seized, or from a discontinued line, replacement is the honest answer — the door gets a new device matched to the door type and your budget.

A dogging feature holds the bar depressed so the door works like a push door during business hours — common where the door is not a fire exit. Where the door or occupancy type does not allow hold-open, the device is installed with dogging disabled; that distinction is checked, not guessed.

Yes — narrow-stile rim devices exist exactly for aluminum and glass storefront doors, mounting into the narrow rail where a standard device would not fit. The device is matched to the stile width and door construction before it is ordered.